![]() Refer to the diagrams in this guide to make sure you're connecting the right pins. To connect the pins on the CPU you will need: Alternatively, if your motherboard's BIOS has difficulty overclocking, the mod is a simple way to increase the CPU speed. However, for motherboards that have no overclocking settings, like OEM motherboards, this is a simple method of overclocking a CPU. If you're motherboard can overclock your CPU from the BIOS, you probably don't need a BSEL mod. Now, if the pins on the CPU are connected like a CPU with a FSB of 1066MHz, the bus speed would now be 266MHz, and the CPU would now run at 2.4GHz (266 x 9). The idea of a BSEL mod is to physically connect pins on a CPU, to make the motherboard 'think' that the CPU has a higher FSB than it actually does.įor example, the Intel Pentium Dual Core E2160 CPU (1.8GHz) has an FSB at 800MHz, a bus speed of 200MHz and a multiplier of 9 to give the CPU its speed of 1.8GHz (200 x 9). Most motherboards (See notes for more about this) use voltage/ground from the pins on a CPU to determine the CPU's FSB. This mod applies to most, if not all, Intel socket 775 CPU's that use a 800MHz or 1066MHz FSB.Ī BSEL mod allows a CPU to be run at a higher speed via hardware modification, without changing any settings in software (Either the BIOS or via software such as SetFSB). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |